Short answer: yes, you can coat an outdoor concrete patio in Michigan, but not with the same epoxy that goes in a basement. Regular epoxy turns yellow and chalky in the sun. An outdoor floor needs a UV-stable topcoat, a grip additive for wet and icy days, and concrete that drains and isn’t moving.
Here’s what it takes to do a patio right, where it works best, and what it costs.
Why outdoor coatings are different
- Sun. Ultraviolet light breaks down standard epoxy. Within a season or two it can yellow, fade and turn chalky. Outdoors, the clear topcoat has to be UV stable and non-yellowing. Ours is.
- Rain and snow. Water has to run off, not pool. Most patios are poured with a slight slope for this; we check it before quoting.
- Freeze and thaw. Water that gets into cracks freezes and expands. Cracks are opened and filled before coating so water can’t get under the floor.
- Traction. A wet or frosty patio is the last place you want a slick surface. We add grip to every outdoor topcoat.
- Heat underfoot. Dark floors get hot in July sun. Lighter tan and gray blends stay more comfortable for bare feet.
Where an outdoor coating works best
- Covered patios and porches: the best fit of all. Less direct sun, less standing water, and the coating looks new for a long time.
- Open backyard patios: work well with the right topcoat and good drainage.
- Three-season and screened porches: an easy upgrade over painted or bare concrete.
- Front steps and stoops: a big curb-appeal boost; we always add grip to steps.
We don’t recommend coating concrete that has heaved, has wide moving cracks, or stays wet for days after rain. Those slabs need concrete work first.

What a patio coating costs
Patios are priced like basements: $6 to $8 per square foot, with bigger floors getting the lower rate. Steps, crack repair and removing old paint or sealer are priced after we see the concrete, and everything is written into one price. See our epoxy floor cost guide for how pricing works.
When we can do it
Outdoor jobs need a dry slab and a dry forecast, so we schedule patios from late spring through early fall. We watch the weather and move the date if rain is coming. Most patios take two to three days, so the primer and each coat can cure inside the manufacturer’s time window. It’s ready for foot traffic the day after the top coat; give it a few more days before dragging heavy furniture or grills across it.
Taking care of it
- Sweep off leaves and dirt; they hold moisture and can stain.
- Hose it off and use a mild cleaner when it needs it. No pressure washer at close range.
- Use a plastic shovel in winter, and avoid piling salt on it; a little sand works for traction.
- Put pads under furniture and grill feet.
Patio coating questions
Can you put epoxy on an outdoor patio?
Yes, with the right system. Outdoors you need a UV-stable, non-yellowing topcoat, a grip additive, good drainage and sound concrete. Standard indoor epoxy yellows and chalks in the sun.
Will an epoxy patio turn yellow?
Not with the right topcoat. Our clear topcoat is UV stable and non-yellowing, which is what makes outdoor floors possible.
Is a coated patio slippery when wet?
We add a grip additive to every outdoor topcoat, and the flake adds texture. That keeps the surface safer when it’s wet. In winter, keep it clear of snow and ice like any walkway.
How much does it cost to coat a patio?
We charge $6 to $8 per square foot, with bigger patios getting the lower rate. Steps and repairs are priced after we see the concrete.
Will a coating fix my cracked patio?
We repair normal cracks before coating. But if the slab has heaved, sunk or has cracks that keep growing, it needs concrete work first.
Get a free estimate
We serve Novi and the cities around it. We’ll look at your patio, check the slope and the concrete, and give you one written price. No deposit, ever. See colors and finishes on our epoxy floors page, or read our guide to picking a flake color.



